Alumi-Cut Series

TENRYU'S best value for your non-ferrous metal cutting needs. Thin Kerf. Very Economical.

The Alumi-Cut Series offers true quality and affordability.

These blades are available in a wide variety of sizes to fit most popular job site and shop saws. Excellent results in aluminum, copper, brass, bronze and other non-ferrous metals. Even works well in many plastics. Also good for woodworking and plastic cutting when needed. Resharpenable for long life, the Alumi-Cut blades will help you improve your bottom line!

These blades are also an excellent choice for cutting laminated flooring (i.e.: Pergo, etc.) with slide-miters or table saws.

EACH BLADE FEATURES:

• Fully-hardened, expertly-tensioned tool steel bodies for true and accurate cuts.
• Appropriate triple-chip grind pattern for non-ferrous metals.
• Quality carbide ground to precision.

Board-Pro Series

The BEST CHOICE for long lasting performance when cutting Fiber-Cement Board.

Fiber-Cement Board is a very abrasive material that wears down normal carbide very quickly. The TENRYU BOARD-PRO incorporates special grade carbide tips for longer life.

Also available: BOARD-PRO PLUS: Latest technology PCD (poly-crystalline diamond) for EXTENDED cutting life- especially for thick (stacked) material. PCD tips produce a smoother cut. Thicker plate on PCD for longer life.

EACH BLADE FEATURES:

• Perfectly-tensioned, hardened-tool steel plates for flat, true run.
• Selected quality carbide grade.
• Extra long blade life.
• Economically priced.
• LESS DUST than traditional blades produce.

Brush Cutter Series

Designed for gas powered brush cutting machines

The Brush Cutter series is a high quality line of carbide tipped blades for cutting brush, saplings and thick grasses with gas powered, brushcutter/weed trimmer machines.

Designed for professional use by land clearing teams and landscapers; these blades are LONG LASTING and FAST CUTTING. They eliminate the need for wasteful and inefficient nylon string and far outlast conventional steel blades or plastic blades.

EACH BLADE FEATURES:

• Individually hammer-tensioned steel plates for true run.
• Specially designed inserted tooth for excellent tip retention.
• Tooth geometry and carbide hardness selected for effective cutting under high-impact conditions.

WARNING:

• Always use proper blade guard.
• Always wear eye protection that meets ANSI Z87.1 requirements & a face shield wherever possible.
• Please be aware of SAFETY issues when operating gas powered saw machines.

Cord-Free Series

First and MOST COMPLETE LINE of premium saw blades made especially for cordless saws

The growth in the cordless saw industry has created a void when it comes to accessory blades. TENRYU has filled the void.

Blades for cutting wood, plastic, aluminum and steel with the most popular cordless machine models are now available- all with TENRYU quality!

EACH BLADE FEATURES:

• Ultra-thin, perfectly tensioned steel plates for true run. This saves precious battery power and life.
• Precision honed, high-grade carbide for easy, smooth cuts and long life.
• Tooth configurations to meet specific cutting material and thickness applications.

Diamond-Pro Series

High quality DIAMOND grit blades for general construction applications using saws or grinders

TENRYU may well be the only saw blade manufacturer that makes DIAMOND blades as well as carbide tipped blades. Our abilities are represented here in a small assortment of blades aimed at general construction applications.

These blades include premium quality blades as well as economical blades that will satisfy the demanding contractor. Each blade in this series consists of top quality diamond grit sintered to our carefully crafted saw plates. The bond used is suitable for work in concrete, stone, and other masonry products. Our best diamond blades are gold colored. Typically, our lower-price-point, economical diamond blades are silver colored.

Please note that TENRYU manufactures industrial diamond blades as well and can quote special requests for blades up to 3.5 meters (11-1/2') in diameter.

Gold Medal Series

EACH BLADE FEATURES:

• Fully-hardened, expertly-tensioned tool steel body for true and accurate cuts, meticulously hand hammer tensioned.
• A new grade of extra hard carbide resists both abrasive and chemical wear better than standard grades for longer life.
• Resin bond-filled expansion slots to absorb any vibration and for quieter cutting.
• TENRYU'S fine grit honing ensures mirror finish on carbide for the keenest possible edges and a super clean cut.

Gold Medal Dado

Superior Cutting Performance

You know our Gold Medal Series to be the best all around blade made anywhere. The Gold Medal Dado Set will only add to TENRYU'S reputation as the brand of choice for fine woodworking. This set produces super-clean dado edges with an astoundingly flat bottom surface in wood materials and even in melamine.

BLADE AND CHIPPER FEATURES:

• Fully heat-treated saw plates for superior endurance under heavy load.
• Individually hand hammer-tensioned for flat and true runs.
• Fine-grit honing of ALL sides of teeth for sharp, easy cutting action and long life.
• Quality fine-grain carbide grade for longer life and easier resharpening.

Please note all safety instructions before use and adhere to instructions for maximum RPM speeds.

Chris Marshall / Woodworkers Journal Magazine June 2004

Mel-Pro Series

The Ultimate Melamine and Veneer-Faced Plywood Cutting Blade

The Mel-Pro Series is a complete line of blades that solve problems associated with cutting melamine and other laminated wood products. Additionally, veneer-faced plywood can be cut without splintering at more reasonable feed speeds than in the past.

FINER CUTS- Precision ground carbide teeth set on hand-tensioned tool steel bodies produce finer cuts without chipping and "bottom-side blowout".

QUIETER- Patented resin bond-filled expansion slots effectively absorb vibration and reduce noise.

LONGER LIFE- High-grade, extra-hard, micro-grain, anti-corrosive carbide teeth fight both chemical and abrasive wear to remain sharp longer. There are a lot of blades on the market that can cut melamine but only one can really cut it chip free, quieter, easier and longer - the TENRYU Mel-Pro.

Numerous requests for a better melamine blade prompted us to spend over a year of research and development to bring you the world's most advanced melamine cutting blade. The Mel-Pro features a fully hardened, expertly tensioned tool steel body that absorbs impact, remains flat and true, and resists excess heat buildup. The Mel-Pro's exclusive, red bond, resin filled expansion slots absorb vibration, reduce heat and permit the blade to run quieter than any other brand. The thin-kerf, mirror-like grind on super hard, specially designed carbide tips allow for lighter cuts and reduce friction heat buildup. The bottom line is your bottom line will look better when you reduce scrap, reduce sharpening costs and reduce noise in your shop with Mel-Pro blades.

Miter-Pro Series

TENRYU'S ultimate woodworking blade for miter saws and radial arm saws

TENRYU responds to customer demand! We now have a line of blades specially designed for high performance and heavier duty applications on miter saws, slide-miter saws and radial arm saws. These are our "Cadillac/Mercedes" grade miter saw blades.

TENRYU'S proven, super-true, laser-cut, hand tensioned steel plate with new and improved, patented, resin bond-filled expansion slots ensures smooth, accurate and quiet cuts.

Specially designed, top-quality, micrograin carbide tips, honed to a precision edge with 600 grit diamond wheels cut clean and easy.

Zero degree hook angle prevents lifting of workpiece but does not make your saw overwork. The result is a safe, chip-free and smooth cut.

EACH BLADE FEATURES:

• Fully-hardened, expertly-tensioned tool steel bodies for true and accurate cuts.
• High-grade, fine grain carbide tips for long life.
• Super-fine grit honing of carbide edge for clean, smooth cuts.
• Additional resin bond-filled expansion slots for even quieter cutting.

Panel-Pro Series

TENRYU'S professionals' choice for high performance panel saw cutting. The same, superior features and benefits of our Mel-Pro series in sizes to fit the most popular panel saws.

Excellent for long lasting, precise cuts in wood, wood composites, and laminated materials on panel saws.

Panel saws are often used to cut large sheets of "difficult" materials like MDF, melamine or particle board. These materials are laden with chemicals and adhesives which attack the carbide causing corrosion of the cutting edge. The Panel-Pro blades come equipped with our best anti-corrosive micro-grain carbide. That, plus our super-flat, perfectly tensioned plate adds up to very precise, long lasting performance on your panel saw!

For cutting aluminum materials on panel saws, see our Alumi-Cut Series blades. For cutting Solid Surface Materials, see our Pro Series for Solid Surface.

Try these blades even without the scoring saw- you'll love the results!

EACH BLADE FEATURES:

• Fully-hardened, expertly-tensioned tool steel bodies for true and accurate cuts.
• High-grade, extra hard, wear-resistant carbide tips for long life.
• Fine grit honing of carbide edges for clean, smooth cuts.
• Resin bond-filled expansion slots for reduced vibration and quieter cutting.

Plastic Cutter Series

TENRYU'S best value for quality cuts in a wide variety of plastics. Thin kerf. Very economical.

The Plastic Cutter series offers true quality, variety, and affordability. Designed for general purpose cutting applications, the Plastic Cutter blades will perform very well in a wide variety of plastic materials. Cutting plastics with the wrong blade results in chipping of brittle materials and/or melting of the cut edge. TENRYU Plastic Cutter blades are manufactured to strict tolerances to reduce chipping. In addition, the "no melt" grind pattern on the carbide teeth helps keep heat build-up down and prevents melting. Smooth, clean and melt-free cuts in PVC, acrylics, and other sheet plastics are made possible.

EACH BLADE FEATURES:

• Individually hammer tensioned steel plates for true run.
• Specially selected grade of carbide for excellent work in plastic.
• TENRYU'S super fine honing leaves a mirror-like finish on the carbide for clean and melt-free cuts.

Power Tool Series

Power Tool Series for the Contractor

Exceptional features and superior quality, Thin Kerf

TENRYU's comprehensive line of blades for portable and stationary power tools. More variety, better quality and greater value. Sizes range from 4" to 14" for most types of applications. The TENRYU PT SERIES goes on to include thin kerf wood cutting blades designed especially for smooth cuts on miter and slide-compound.

BLADE FEATURES:

• Fully hardened, expertly tensioned tool steel bodies absorb impact, remain flat and true, and resist excess heat build-up.
• High-grade, C-3, fine-grain tungsten carbide tips resist erosion for extended blade life.
• Aggressive rake angles for maximum cutting speed and efficiency.
• Each tip is precision honed on all four exposed surfaces. This minimizes micro-chipping along the sharp edge of the blade and results in a sharper, longer-lasting edge.
• Thin kerf for less waste and lighter cutting performance (reduced feed pressure).
• Inserted tooth design on some models greatly increases the body-to-tip braze area for greater support and tip strength.
• Expansion slots and/or variable pitch gullets keep blade cool under stressful work loads.
• Can be resharpened for extended blade life.

POWER TOOL SERIES FOR MITER & RADIAL ARM SAWS

The "PT" Series blades for miter or slide miter saws range in sizes from 8-1/2" for the popular Hitachi through 12" diameters. 14" blades for older saws can be found on page___ in our Pro Series for Wood. 15" miter saw blades are available in our Miter-Pro Series following.

EACH BLADE FEATURES:

• Thin kerf design is easier on miter saw motors and brakes.
• Fully hardened, expertly tensioned tool steel bodies.
• Fine grain tungsten carbide tips with fine grit honing for keen edges.

Pro Series for Non-Ferrous

TENRYU'S superior quality line for extra heavy duty applications.

Our "Cadillac/Mercedes" grade.

EACH BLADE FEATURES:

• Heavier, laser cut, fully-hardened blade bodies stay flatter and truer longer.
• Top-quality, fine-grain, premium grade carbide tips for smoother cuts and longer life.
• Tips are fine-finish honed on all surfaces down to 600 grit.

Pro Series for Plastic

TENRYU'S superior quality line for professional craftsmen

Laser cut, press-tempered, individually tensioned, and chrome-plated bodies bring the cutting edge to the workpiece with unparalleled precision. Fine grain carbide tips are given the tooth configuration to do the job right .

EACH BLADE FEATURES:

• Fully-hardened, expertly-tensioned tool steel bodies for true and accurate cuts
• High-grade, C-4, wear-resistant carbide tips for long life.
• Resin bond-filled expansion slots act as built in dampeners- keeping your cuts quiet!

Pro Series for Solid Surface

Premium design and craftsmanship

The Pro Series for Solid Surface (PRS) blade is the professional's choice when industrial quality is required. TENRYU'S built-in dampening system keeps noise and vibration to a minimum, allowing for super-clean, melt-free performance. Sizes are available for most popular types of saws from 7-1/4" to 18" in diameter, including panel saws. triple chip, negative rake design for optimum performance in solid surface* and a variety of other materials.

*Solid surface is produced under trade names such as Corian, Avonite, Fountainhead and others.

EACH BLADE FEATURES:

• Laser cut, fully-hardened tool steel plates for industrial use.
• Individually hand-tensioned plates for true, accurate cuts.
• Built-in dampening system to minimize vibration and reduce noise.
• Fine-grain, C-4, premium-grade carbide tips for smoother cuts and longer life.

Pro Series for Wood Materials

TENRYU'S superior quality line for professional craftsmen

Laser cut, press tempered, individually hammer tensioned, and chrome-plated bodies bring the cutting edge to the workpiece with unparalleled precision. Fine grain carbide tips are given the tooth configuration to do the job right. Pro Series blades are also made to handle non-ferrous metal cutting, plastics, or solid surface materials. These blades are made to satisfy the most demanding craftsmen.

EACH BLADE FEATURES:

• Fully-hardened, expertly-tensioned tool steel bodies for true and accurate cuts.
• High-grade, fine grain, C-4 wear-resistant carbide tips for long life.
• Fine grit honing of carbide edge for clean, smooth cuts.
• Resin bond-filled expansion slots act as built in dampeners- keeping your cuts quiet and the saw's plate vibration-free!

"The cuts were so quiet and effortless that I thought I had forgotten to raise the blade."
10", 60 tooth, PR-25560D

Fine Woodworking, Nov/Dec 1997 (page110)

Rapid-Cut Series

TENRYU'S Premium Heavy Duty, Industrial, Multi-Purpose Blades

We offer an entire line of industrial duty "work horse" blades that cover the 10 to 16 inch diameter range. These blades are all meant to be used on shop tools such as table saws. In addition, many models can be used on more specialized machinery with arbor hole adjustments. Each blade has a large carbide tip following the European tradition and can be resharpened up to 20 times.

Value is key here. These blades are priced very competitively. The small shop and corporate giant alike will appreciate getting quality industrial blades at an affordable price.

EACH BLADE FEATURES:

• Individually hand-hammered, fully heat hardened steel plates for flat, true, wobble-free operation.
• Aggressive grind angles for easy performance in heavy-duty jobs. Honing carried out at 400 grit to limit microchipping and produce a very keen edge.
• Large, high-grade carbide tips selected for long life in woodworking applications.
• Ample side clearance provides for air flow between carbide and workpiece - limits likelihood of burning even on heavy rips. This also prevents premature dulling.

Rescue Blades

The RESCUE BLADE series is a high quality line of carbide tipped blades for cutting most building materials including roofing and most non-ferrous metals. Designed for heavy-duty demolition and for use by fire departments in fire fighting operations, these blades are excellent for use in pallet breaking and floor removal. Please be aware of SAFETY issues when operating gas powered saw machines.

EACH BLADE FEATURES:

• Individually hammer-tensioned steel plates for true run.
• Specially selected, extremely tough grade of carbide for excellent work in a variety of materials.
• Tooth geometry selected for effective cutting under high-impact conditions.

Silencer Series

For Slide-Miter Saws, convention Miter Saws, and crosscutting with Portable Saws

EACH BLADE FEATURES:

• New vibration dampening system featuring TENRYU resin filled laser cut body slots.
• Meticulous, hand hammer plate tensioning for a flatter blade and truer cuts.

Steel-Pro Series

STEEL-PRO SERIES

TENRYU's steel cutting carbide tipped saw blades for industrial performance

Cut ferrous metals (mild steel) faster, cleaner and easier. Save time, money, the environment, and your respiratory health.

TENRYU's complete series of steel cutting saw blades called "Steel-Pro" makes light work out of all kinds of mild steel: steel studs, steel sheet, steel pipe, channel, threaded rod and much, much more.

Specially formulated C-6 carbide grade, combined with our unique tip design, resists breakage on impact and lasts longer- much longer than standard carbides or abrasive discs. Special tooth geometry with "inserted" tooth design greatly improves security of the tip, efficiency and durability.

Abrasive discs throw sparks and lots of dust including unhealthful fiberglass. You shouldn't be breathing it in! Steel-Pro blades reduce spark production and eliminate abrasive wheel dust.

Abrasive discs wear quickly, requiring frequent blade changes. Steel-Pro blades allow you to keep working; eliminating down time for frequent blade changes. In addition, Steel-Pro cuts 5 to 10 times faster than abrasives. Typically, one Steel-Pro blade will outlast somewhere between 15 to 30 abrasive blades. Think of all that non-productive "down time".

Abrasive discs leave a sharp burr at the cutting edge that must be removed later. Steel-Pro blades cut clean; eliminating this extremely time-consuming after-cut process. "Time is money". Steel-Pro saves BOTH!

EACH BLADE FEATURES:

• Rugged plates and specially formulated carbide tips with a special tooth grind for fast, clean cuts.
• High quality cuts without the clouds of dust and scorch marks associated with friction blades.
• Cool cuts that leave the work piece edge free of burrs.
• Reduced cost-per-cut and maximized performance for the operator as a result of fewer blade changes.

Please note all safety instructions before use and adhere to instructions for maximum RPM speeds.

STEEL-PRO SELECT

The Steel-Pro Select is TENRYU's 2nd generation of mild steel cutting carbide tipped saw blades. Quieter!

These blades are designed to cut mild steel as STEEL-PRO blades do, but cut quieter than STEEL-PRO and last longer as well.

EACH BLADE FEATURES:

• Exclusive two-ply plate design for self dampening and low noise operation.
• Individually hammer-tensioned steel plates for true run.
• Tough C-6 carbide for impact resistance and long cutting life.
• Unique tip design and geometry for smoother and easier cuts.
• Inserted teeth with chip limiting steel support for added durability and safety.
• Steel-Pro Select blades, when used for the proper application, will save lots of time and can outlast abrasive discs up to 30 to 1.

Please note all safety instructions before use and adhere to instructions for maximum rpm speeds.

STEEL-PRO PLUS

The Steel-Pro Plus is the newest addition to our Steel-Pro line. It is made especially for use with lower RPM saws such as WORM DRIVE SAWS to cut a wide variety of mild steel materials with:

• Longer life than standard Steel-Pro blades
• Fewer blade changes.
• No dust clouds
• Reduced sparking
• Less noise
• Less burr on edges

EACH BLADE FEATURES:

• New Cermet (ceramic metal) tips for greater impact resistance and longer cutting life.
• Individually Hammer-tensioned steel plates for true run.
• Unique tooth design and geometry for smoother and easier cuts.
• Inserted teeth with chip limiting steel support for added durability and safety.

Steel-Pro Plus is particularly effective for cutting thicker, solid stock and higher tensile all-thread rod.

These blades, when used for the proper application, will save much time and outlast abrasive discs up to 60 to 1.

Please note all safety instructions before use and adhere to instructions for maximum RPM speeds.

Steel-Pro for Stainless Series

Now it is possible to cut stainless steel with greater efficiency on your low RPM metal-cutting saw

The Steel-Pro for Stainless Series is the result of nearly two years of intensive product testing. Never before has cutting stainless steel been so easy and economical. The TENRYU Steel-Pro? for Stainless blades allow you to cut a wide variety of stainless steel materials with:

• GREATLY IMPROVED CUTTING SPEED
• LESS BURR ON EDGES (resulting in tremendous time savings)
• NO SCORCHING OF THE STAINLESS.
• REDUCED SPARKING
• LONGER LIFE THAN THE COMPETITION'S BLADES!
• FEWER BLADE CHANGES

EACH BLADE FEATURES:

• Individually hand-hammer tensioned steel plates for true run.
• Unique tooth design and geometry for smoother and easier cuts.
• Inserted teeth with chip limiting steel support for added durability and safety.
• New grade of carbide for longer cutting life in stainless steel.
• Resin bond-filled laser expansion slots for reduced vibration.

These blades, when used for the proper application, will save time and money.

Please note all safety instructions before use and adhere to instructions for maximum RPM speeds.

Be advised that various grades of stainless steel differ greatly in it's ability to be cut. Common grades include .303, .304, up to .316 stainless. These materials are progressively tougher to cut, and more rapid dulling of even the best blades must be expected. However, due to the fact that Steel-Pro? for Stainless cuts so quickly and without time consuming de-burring, compared with former cutting methods, TIME and OVERALL COST SAVINGS are VERY SIGNIFICANT.

ALWAYS WEAR EYE PROTECTION that meets ANSI Z87.1 requirements and PROPERLY FUNCTIONING UPPER and LOWER BLADES GUARD.

Tenryu Super Diamond Series

TSD is a new line of products representing a revolution in diamond tooling technology. TENRYU has developed a new method of fusing polycrystalline diamond particles to various shaped tool steels. As a result, very fast cutting rates and longer, effective cutting life is attained.

Currently, this technology is available on a 4" Depressed Center Cup Wheel for grinding applications using 4-1/2", 5" or 7" right angle grinders.

Also available are 7", 12" and 14" saw blades (also referred to as Type S-1 wheels). They fit on circular saws, chop saws, and even gas-engine rescue-type saws.

TSD was originally developed to cut and grind cast-iron and ductile iron materials. Through further refinement it was discovered that fast, efficient cutting and grinding of a multitude of other materials is possible. That includes mild steel, brick, granite, marble and other natural stones, ceramic materials, solid-surface materials, fiber reinforced plastics and a variety of masonry materials.

TSD Depressed Center Cup Wheel

FAST GRINDING of cast iron, ductile iron, steel, granite, marble and other natural stones, ceramic materials, solid-surface materials, fiber reinforced plastics, brick and a variety of masonry products.

Until now, standard diamond grinding wheels were the only choice for stone workers. They were expensive and wore quickly when used heavily.

The TSD (TENRYU Super Diamond) removes material very rapidly and will last longer than conventional diamond tooling.

Curved outer edge makes it easier to grind the insides of holes and curved shaped surfaces.

TSD (TENRYU SUPER DIAMOND) Cutoff Blades

FAST CUTTING of a wide variety of materials on portable, chop and gas-engine rescue or construction type saws.

Quickly cuts cast iron, ductile iron, steel, sheet metal, car bodies, refractory brick, masonry materials and much, much more.